Vehicle information and settings

From UgCS
Jump to: navigation, search

Main Page UgCS UgCS for DJI User Manual UgCS for DJI user interface

Download this subcategory as a PDF file


Tapping information button opens a screen with current vehicle information, calibration and settings options.

Vehicle information and settings.png


Overall status – Displays the current status of the vehicle

Flight mode – The flight mode, drone is currently using.
Sport – Sport Mode increases the available speed of the aircraft by using GPS signal only. The forward & downward sensors are disabled. The gain on the controller is increased.
Position GPS (P-GPS) - all the sensors on the aircraft are active, GPS and any available vision or infrared sensors.
Tripod – Aircraft has a maximum speed of 2.2 mph and the remote controller movements are significantly reduced.
ATTI – ATTI mode will only maintain the altitude of the aircraft and does not use any GPS or vision systems.

Compass – Compass helps the vehicle with orientation. Calibrate the compass every time the vehicle takes off from a new place

IMU (Inertia Measurement Unit) Status – Barometer and gyroscope allows to see the altitude and the direction of the flight. Calibrate IMU in case of abnormal behavior.

ESC (Electronic Speed Control) Status – Motor control. In case of abnormal motor behavior, an error message will display here.

Vision sensors – Allows the vehicle to see the obstacles

Radio channel quality – Quality of the radio signal between the RC and drone

Remote controller mode – Controller sticks mode

Mode 1 (left: forward/backward ; turn left/right | right: up/down ; sideways left/right)
Mode 2 (left: up/down ; turn left/right | right: forward/backward ; sideways left/right)
Mode 3 (left: forward/backward ; sideways left/right | right: up/down ; turn left/right)

Aircraft battery – Remaining drone battery charge percentage

Remote controller battery – Remaining remote controller charge percentage

Aircraft battery temperature – Temperature of the aircraft battery
SD Card storage – Available space and status of the drone SD card. Option to format SD card.

Gimbal status – Status of the aircraft gimbal

Max altitude – Set the maximum altitude the drone can gain

Max flight distance – Set the maximum range the drone can fly from RC or disable the fence.

Internal storage – Drone internal storage