Difference between revisions of "How to connect DJI RTK by NTRIP"

From UgCS
Jump to: navigation, search
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
How to connect DJI Phantom 4 RTK with UgCS  
+
==== Connecting DJI Phantom 4 RTK with UgCS for DJI  ====
  
 
NTRIP SETUP SCHEME
 
NTRIP SETUP SCHEME
[[File:Scheme.png|thumb|left]]
+
<br>
  
 +
[[File:Scheme.png|thumb|center|600px]]
  
1. Choose a RTK network service, e.g. YouCors.
 
2. Create a Mount point and select a server with lowest latency.
 
[[File:YouCors.png|thumb|left]]
 
3. Create a Client for the Mount point.
 
[[File:Create Client.png|frame|center]]
 
5. Open the mobile application of the RTK base. Add created NTRIP Client address address, Port and Password, Mount point name.
 
[[File:RTK base app.png|thumb|left]]
 
 
  
6. Configure RTK base if needed.
+
1. Open UgCS for DJI app and in the Menu choose RTK Settings.<br>
 +
[[File:RTK Settings.jpg|600px|center]]<br>
 +
2. Switch on the "Enable RTK" check box and select and tap "RTK source".<br>
 +
[[File:1Enable RTK.png|600px|center]]<br>
 +
3. Select "Custom network service".<br>
 +
[[File:CustomNetworkService.jpg|600px|center]]<br>
 +
4. Enter RTK Server address, port, password, and mount point.<br>
 +
[[File:NTRIP1.png|600px|center]]<br>
 +
[[File:NTRIP2.png|600px|center]]<br>
 +
5. When UgCS for DJI is connected to the RTK the green NTRIP icon will be displayed in the top left corner.
 +
<br>
 +
[[File:UgCS Rtk connected.png|thumb|center|600px| To display a window with the additional RTK info tap on the NTRIP icon. ]]
  
 
+
===== How to setup RTK network service=====
6. Launch DJI Pilot and go to RTK settings- specify NTRIP Host and each time press save to connect to the Host.
+
1. Go to public NTRIP casters webpage, e.g. http://youcors.com/.<br>
 
+
1.1 Create a Mount point and select a server with lowest latency.<br>
 
+
[[File:YouCors.png|thumb|center|600px]]<br>
7. When the connection is made the “RTK connected” status will be displayed.
+
1.2 Create a Client for the Mount point. <br>
 
+
[[File:Create Client.png|frame|center|600px]]<br>
 
+
2. Open the mobile application of the RTK base. Add created NTRIP Client address, Port and Password, Mount point name.<br>
8. Open UgCS for DJI app and in the Menu choose DJI RTK Network Service Settings.  
+
[[File:RTK base app.png|thumb|center|600px]]<br>
 
+
3. Configure RTK base if needed.<br>
 
+
[[File:Rtk base settings.png|thumb|center|600px]]<br>
9. Enter RTK Server address, port, password and mount point.
 
 
 
 
 
10. When UgCS for DJI is connected to the RTK the green NTRIP icon will be displayed in the top left corner.
 

Latest revision as of 09:15, 16 December 2020

Connecting DJI Phantom 4 RTK with UgCS for DJI

NTRIP SETUP SCHEME

Scheme.png


1. Open UgCS for DJI app and in the Menu choose RTK Settings.

RTK Settings.jpg


2. Switch on the "Enable RTK" check box and select and tap "RTK source".

1Enable RTK.png


3. Select "Custom network service".

CustomNetworkService.jpg


4. Enter RTK Server address, port, password, and mount point.

NTRIP1.png


NTRIP2.png


5. When UgCS for DJI is connected to the RTK the green NTRIP icon will be displayed in the top left corner.

To display a window with the additional RTK info tap on the NTRIP icon.
How to setup RTK network service

1. Go to public NTRIP casters webpage, e.g. http://youcors.com/.
1.1 Create a Mount point and select a server with lowest latency.

YouCors.png


1.2 Create a Client for the Mount point.

Create Client.png


2. Open the mobile application of the RTK base. Add created NTRIP Client address, Port and Password, Mount point name.

RTK base app.png


3. Configure RTK base if needed.

Rtk base settings.png