Difference between revisions of "How to connect DJI RTK by NTRIP"

From UgCS
Jump to: navigation, search
(Created page with "How to connect DJI Phantom 4 RTK with UgCS NTRIP SETUP SCHEME thumb|left Choose a RTK network service, e.g. YouCors. Create a Mount point and select a...")
 
Line 5: Line 5:
  
  
Choose a RTK network service, e.g. YouCors.
+
1. Choose a RTK network service, e.g. YouCors.
Create a Mount point and select a server with lowest latency.  
+
2. Create a Mount point and select a server with lowest latency.  
 
[[File:YouCors.png|thumb|left]]
 
[[File:YouCors.png|thumb|left]]
Create a Client for the Mount point.
+
3. Create a Client for the Mount point.
[[File:RTK base app.png|thumb|left]]
+
[[File:Create Client.png|frame|center]]
 
5. Open the mobile application of the RTK base. Add created NTRIP Client address address, Port and Password, Mount point name.
 
5. Open the mobile application of the RTK base. Add created NTRIP Client address address, Port and Password, Mount point name.
 
[[File:RTK base app.png|thumb|left]]
 
[[File:RTK base app.png|thumb|left]]

Revision as of 12:11, 11 September 2020

How to connect DJI Phantom 4 RTK with UgCS

NTRIP SETUP SCHEME

Scheme.png


1. Choose a RTK network service, e.g. YouCors. 2. Create a Mount point and select a server with lowest latency.

YouCors.png

3. Create a Client for the Mount point.

Create Client.png

5. Open the mobile application of the RTK base. Add created NTRIP Client address address, Port and Password, Mount point name.

RTK base app.png


6. Configure RTK base if needed.


6. Launch DJI Pilot and go to RTK settings- specify NTRIP Host and each time press save to connect to the Host.


7. When the connection is made the “RTK connected” status will be displayed.


8. Open UgCS for DJI app and in the Menu choose DJI RTK Network Service Settings.


9. Enter RTK Server address, port, password and mount point.


10. When UgCS for DJI is connected to the RTK the green NTRIP icon will be displayed in the top left corner.